Chain end 16mm Tube SS 304. With this tube end, you can easily and quickly make impressive chain necklaces. With this very versatile chain head you can make ball chains into tassel-style dangling earrings, stunning bracelets and multi-strand necklaces from chains. The Tube chain end is ideal for use with ball chains (max. 3mm ball chain). Also suitable for beam chain and thin steel chain with 3mm steel balls.
Tube chain end is easy to use. One end of the tube is pre-sealed and the other end is open with a groove in the middle of the tube. The ball chains are inserted from one ball to hang in the tube in order. If you wish, you can also put different sizes of ball chains in the tube. Finally, the open end is closed with a pair of jewellery pliers (see picture).
TIP: You can also put other chains on the end of the tube using a flat-headed pins. Take a thin flat-headed pin and insert a small steel bead SS 304, e.g. 2mm, into the end as shown in picture 5 and shorten the pin to the appropriate length. Make a small loop on the end using round pliers and attach the chain to it. Insert the flat end of the spike/pin with the small metal bead into the groove. In this way you can put almost any chain on a tube end. Picture 5 shows a sample of a jewellery chain 1.5mm+ball SS 304 and a jewellery chain cable 3x2x0.6mm SS 304 inserted in a tube. The ball chain is attached to the ball, but the cable chain has a small additional adjustment made to it with the help of the jewel case.
Material: stainless steel SS 304
Size: 6x16x4mm (inner diameter 3mm)
Hole: approx.3x1.5mm
Minimum Order Quantity: 6pcs.
Product tested in Finland.
Chain End 20mm Tube SS 204 6pcs
Chain end 13mm Tube SS 304 6pcs
